51 16... Removing and installing cover on panel for rear storage box

If necessary, actuate emergency release cable from luggage compartment.

Open lid on storage box.

Release expansion rivets (1).

Unclip cover (2) and remove.

Fig 1: Releasing Expansion Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts of cover (3) must not be damaged or missing:

1. Catches
2. Mounts for expansion rivet
   Fig 2: Locating Catches And Mounts For Expansion Rivet

   Courtesy of BMW OF NORTH AMERICA, INC.