51 71 447 Removing and installing or replacing panel for cover on left or right side member

Release screws (1 and 2). Release clips (3).

Fig 1: Releasing Screws (1 & 2), & Releasing Clips (3)

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip panel (1) in areas (A and B) from holders in direction of arrow.

Release panel (1) at clips (2) and remove in direction of arrow.

Fig 2: Removing Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: Catches of panel (1) in areas (A and B) must not be damaged.

Fig 3: Identifying Holders & Clips

Courtesy of BMW OF NORTH AMERICA, INC.