51 11 050 Removing and installing/replacing carrier for front bumper trim

Release expander rivets (1) and remove impact absorber (2).

Fig 1: Releasing Expander Rivets (1) & Removing Impact Absorber (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 and 2) on left/right and remove carrier (3). Tightening torque, see 51 11 5AZ in BODY EQUIPMENT - TIGHTENING TORQUES .

Fig 2: Releasing Screws (1 & 2) Removing Carrier (3)

Courtesy of BMW OF NORTH AMERICA, INC.