33 32 170 Removing and installing/replacing left or right tension strut
NOTE:
Build date from 07/2006:
Thread inserts in compression strut for securing tension strut have been omitted.
Thread inserts in compression strut for securing tension strut have been omitted.
IMPORTANT:
Observe safety instructions for raising the vehicle, see 00 ... ... LIFTING VEHICLE WITH A LIFTING PLATFORM
.
Driving without tension struts is not permitted!
Driving without tension struts is not permitted!
Release screws (1, 3).
Remove tension strut (2).
Installation:
When replacing compression strut: If necessary, replace threaded screws (3) with self-tapping screws.
Tightening torque: 33 32 26AZ, see 33 32 CONTROL ARMS AND STRUTS .