72 11 030 Removing and installing/replacing front left or right seat belt

Necessary preliminary tasks:

Remove panel for door post

WARNING: Read and comply with safety regulations for handling airbag modules and pyrotechnic belt tensioners, see 72 Safety precautions and general information

Improper handling can lead to triggering of the

pyrotechnic seat belt tensioner or side airbag, resulting in injuries.

Switch off ignition.

Release screw (1).

Tightening torque: 72 11 11AZ, see 72 11 SEAT BELTS .

Remove seat belt (2).

Installation:

Make sure tab of seat belt (2) is correctly installed between retaining lugs.

Fig 1: Seat Belt Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque: 72 11 19AZ, see 72 11 SEAT BELTS .

Remove belt guide (2).

Unscrew bolt (3).

Tightening torque: 72 11 20AZ, see 72 11 SEAT BELTS .

Remove belt (4).

Fig 2: Belt Guide, Screws And Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: 72 11 14AZ, see 72 11 SEAT BELTS .

Remove automatic reel (3).

Installation:

Coding (2) of automatic reel must be seated in body opening.

Retaining screw (1) locates automatic reel in position.

Fig 3: Automatic Reel And Retaining Screw

Courtesy of BMW OF NORTH AMERICA, INC.