65 50 055 Removing and installing/replacing central information display

Necessary preliminary tasks: 

• Remove operator unit for heater/air conditioner, see 64 11 377 REMOVING AND INSTALLING CONTROL PANEL FOR HEATER - A/C SYSTEM (REPLACING, AUTOMATIC AIR CONDITIONING) .

Fold monitor (1) open.

Loosen screws (2).

Unlock plug connection for central information display (3) and disconnect.

Raise central information display (4) on passenger side.

Feed out associated wiring harness and remove central information display (4).

Fig 1: Central Information Display

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure wiring harness of central information display (4) is correctly routed.