65 11 080 Removing and installing/replacing radio receiver

Necessary preliminary tasks: 

• Remove operator unit for heater/air conditioner, see 64 11 377 REMOVING AND INSTALLING CONTROL PANEL FOR HEATER - A/C SYSTEM (REPLACING, AUTOMATIC AIR CONDITIONING) .

Release screws (1).

Pull back radio receiver (2) slightly.

Unlock and disconnect associated plug connections, remove radio receiver (2).

Installation: 

Make sure guide pin (3) is correctly seated in associated fixture.

Fig 1: Radio Receiver And Guide Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding  using appropriate BMW service tool.