51 49 015 Removing and installing/replacing trim for rear window frame at top

Special tools required: 

• 00 9 317 00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE)

Unclip trim (1) with special tool 00 9 317  from retainers (2) and remove in direction of arrow.

Installation: 

If necessary, detach clips (2) from trim (1) and insert in rear lid.

If necessary, replace faulty clips (2).

Fig 1: Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

.Guides (1) on trim (2) must not be damaged.

Fig 2: Guides And Trim

Courtesy of BMW OF NORTH AMERICA, INC.