51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left
Special tools required:
Necessary preliminary tasks:
- Remove front entrance cover strip, see 51 47 000 Removing and installing/replacing front (inside) left or right entrance cover strip
- Remove trim panel for pedal assembly, see 51 45 185 Removing and installing/replacing trim for pedal assembly
Detach mucket (1) in area of footwell trim.
Release screw (2) and remove release lever (3).
Release screw (1).
Unclip clips (2) with special tool 00 9 317.
Remove trim panel (3) towards inside.
Installation:
Clips (1) on trim panel (2) must not be damaged.