51 16 200 Removing and installing/replacing storage compartment (with CD changer)

Special tools required:

Necessary preliminary tasks:

Unclip trim (1) towards top.

Remove compartment (2).

Installation:

Clips (3) must not be damaged.

Fig 1: Trim, Compartment And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing compartment (1), make sure guides (2) are inserted into guides (3) on storage compartment (4).

Fig 2: Compartment, Guides And Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Version with telephone:

Disconnect plug connection (1).

Release protective sleeve (2) and disconnect plug connection underneath.

Fig 3: Plug Connection And Protective Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip catches (1) on gaiter (2) with special tool 00 9 317.

Detach gaiter (2) with handle towards front.

Fig 4: Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully snap out trim (1) towards rear.

Disconnect associated plug connection and remove trim light (1).

Fig 5: Trim Light

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and screws (2) on rear storage compartment.

Fig 6: Nuts And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 and 2).

Feed out storage compartment (3) upwards over handbrake lever (4) and remove.

Fig 7: Storage Compartment And Handbrake Lever

Courtesy of BMW OF NORTH AMERICA, INC.