51 22 225 Removing and installing/replacing inside door opener of rear left or right door

Necessary preliminary tasks: 

• Remove rear door trim panel, see 51 42 000 Removing and installing left or right rear door trim panel 

Unhook Bowden cable for release lever:

• Tighten release lever (1).
• Lever out lock (2).
• Detach Bowden cable (3) towards rear/top.

Installation: 

For fitting, press release lever (1) fully onto door trim panel.

Drive out spindle (1) in upward direction.

Remove door opener (3).

Installation: 

Spindle (1) must be flush with housing (2).