51 12 825 Removing and installing/replacing guide for rear center bumper

Necessary preliminary tasks: 

• Remove rear bumper trim, see 51 12 156 Removing and installing rear bumper trim (from 09/2006) 

Version with Park Distance Control: 

If necessary, release cable holders (1) and lay cable to one side.

Unfasten screws (2).

Remove guide (3).

Installation: 

If necessary, replace damaged cable straps (1).

Tightening torque: 51 12 10AZ, see 51 12 REAR BUMPER

Fig 1: Cable Straps, Guide And Screw

Courtesy of BMW OF NORTH AMERICA, INC.