63 25 000 Removing and installing/replacing auxiliary brake light

Necessary preliminary tasks:

Release screws (1).

Installation:

Make sure hose (2) is correctly seated.

Slide additional stop light (3) slightly towards rear out of rear spoiler.

Fig 1: Additional Stop Light And Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Pull additional stop light (2) in direction of arrow out of rear spoiler (3) and remove.

Fig 2: Plug Connection And Additional Stop Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) must be exactly seated in locators (2).

Make sure electrical leads (3) are correctly routed.

Fig 3: Guides And Electrical Leads

Courtesy of BMW OF NORTH AMERICA, INC.