51 33 000 Removing and installing (replacing) power window unit in left or right front door

NOTE: When removing door lock, snap door window glass out only, do not remove, secure in door window frame.

Necessary preliminary tasks:

Unscrew nuts (1).

Feed out rear section of power window unit (2) in direction of arrow.

Installation:

Tightening torque: 51 33 2AZ, see 51 33 POWER WINDOWS, FRONT

Fig 1: Power Window Unit And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The work step "Removing and installing/replace door lock" ends here.

Feed out front section of power window unit (1) with flat motor (2) in direction of arrow from front door.

Replacement:

Fig 2: Power Window Unit And Flat Motor

Courtesy of BMW OF NORTH AMERICA, INC.