35 40 001 Removing and installing/replacing accelerator pedal module

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Installation: 

Tightening torque, 35 40 1AZ.  See PEDALS - TIGHTENING TORQUES -- 650I .

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Plug

Courtesy of BMW OF NORTH AMERICA, INC.