72 12 010 Removing and installing/replacing airbag module on left or right front door
WARNING:
Read and comply with Safety regulations
for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Front and rear airbag modules must not be mixed up.
Incorrect handling can activate airbag and cause injury.
Front and rear airbag modules must not be mixed up.
Necessary preliminary tasks:
- Disconnect battery negative lead . See 61 00 ... BATTERY .
- Remove front door trim . See 41 FRONT DOOR TRIM PANEL .
Unfasten screws.
Carefully remove airbag module.
Installation:
Before installing airbag module, remove all foreign bodies (screws, etc.) from installation recess.
Replace screws.
Tightening torque 72 12 01AZ.