51 43 148 Removing and installing or replacing trim on left or right door pillar (top)
Special tools required:
- 00 9 317
Lever out cap (1).
Release screw (2) and detach seatbelt strap (5).
Tightening torque 72 11 4AZ . See RESTRAINT SYSTEM - TIGHTENING TORQUES .
Partially loosen edge protection (1).
Unclip clips (2) of panel (3) with special tool 00 9 317 in direction of arrow.
Feed out seatbelt strap (4) and remove panel (3).
Installation:
Clips (1) of panel (2) must not be damaged.