12 62 Coolant Temperature
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | - | - | 18 Nm |
| - | M51 | - | - | 13 Nm |
| 2AZ Temperature switch (5.5°C / 17°C) to fuel filter/cylinder head | M21 | - | - | 18 Nm |
| 3AZ Coolant temperature sensor (2-pin plug-in connection) | S38/S50 | - | - | 13 Nm |
| - | S85 | M12/1.52 | - | 13.5 Nm |
| - | All / others | - | - | 20 Nm |
| 4AZ Remote thermometer sensor (2-pin plug-in connection) | All | - | - | 20 Nm |
| Remote thermometer sensor (4-pin plug-in connection) | M62 | - | - | 16 Nm |
| - | S62 | M12 x 1.5 | - | 14 Nm |
| 5AZ Remote thermometer sensor on coolant flange | S50 | - | - | 18 Nm |
| 6AZ Temperature sensor - air | S38/S50 | - | - | 13 Nm |
| 7AZ Temperature sensor - oil | S38/S50 | - | - | 13 Nm |
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Coolant temperature sensor | S85 | M12x1.5 | - | 14 Nm |