51 13 316 Removing and installing/replacing trim strip on roof gutter at left or right

Detach mucket (1) in area of trim strip (2).

Fig 1: Identifying Mucket And Trim Strip

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Make sure that body is not damaged.

Start at front, pull off trim strip (1) in direction of arrow from clips (2).

Installation:

To avoid leaks and noises, check all clips (2) for visible damage.

If necessary, replace faulty clips (2).

Fig 2: Pulling Off Trim Strip From Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure sealing strip (2) is correctly seated on trim strip (1).

Sealing strip (2) must not be damaged.

Fig 3: Identifying Trim Strip And Sealing Strip

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: