61 67 083 Removing and installing/replacing left or right high-pressure nozzle of headlight washer system
Necessary preliminary tasks:
- Remove cover for headlight washer system (See 51 11 ... REMOVING AND INSTALLING/REPLACING COVER FOR HEADLIGHT WASHER SYSTEM ON LEFT )
- Remove front bumper trim. (See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM )
Unlock high-pressure line (1) and detach from high-pressure nozzle of headlight cleaning system (3).
Pull locks (2) in direction of arrow.
Pull high-pressure nozzle of headlight cleaning system (3) in direction of arrow out of guides and feed out through opening in bumper trim.
Installation:
Make sure high-pressure nozzle of headlight cleaning system (3) is correctly seated.
New high-pressure nozzle of headlight cleaning system (3) is already preadjusted.