61 35 622 Removing and installing/replacing general module

Necessary preliminary tasks: 

• Remove trim for instrument panel, bottom left  (See 51 45 181 REMOVING AND INSTALLING/REPLACING TRIM FOR INSTRUMENT PANEL, BOTTOM RIGHT )

Release screws (1).

Remove general module (3) from instrument panel trim at bottom right (4).

Installation: 

Make sure general module (3) is correctly seated in guides (2).

Fig 1: Identifying General Module, Instrument Panel, Guides & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Using BMW scan tool, programming/coding.