65 75 071 Removing and installing (replacing) module for passenger compartment sensor

Special tools required:

IMPORTANT: Protect against electrostatic damage (ESD protection)!

Press trim (1) out of roofliner with special tool 00 9 318.

Disconnect associated plug connection.

Fig 1: Identifying Trim With Special Tool (00 9 318)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unclip ultrasonic module (1) from mountings (2) on both sides.

Installation:

Arrow (3) on ultrasonic module must point in direction of travel.

Fig 2: Identifying Ultrasonic Module And Mountings

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding.