84 11 519 Removing and installing/replacing eject box

Special tools required: 

• 00 9 340 

Necessary preliminary tasks: 

• Remove rear storage box  . See 51 16 240 REMOVING AND INSTALLING REAR STORAGE COMPARTMENT .

Lever eject box (1) with special tool 00 9 340  out of storage box cover (2).

Disconnect plug connections (1) and if necessary release cable ties.

Feed lead (2) out of floor lining (3) and remove eject box.

Installation: 

Make sure lead is correctly routed.

Lead (2) must not be crushed.