51 49 009 Replacing panel for rear lid at bottom

Necessary preliminary tasks: 

• Remove trim for rear window frame  on left and right (See 51 49 003 REMOVING AND INSTALLING/REPLACING TRIM FOR REAR WINDOW FRAME ON LEFT OR RIGHT )

Version with emergency release: 

Detach handle (1) from clip (2).

Disconnect Bowden cable (3) from handle (1).

Installation: 

Guide Bowden cable (3) through clip (2) and connect correctly in handle (1).

Release screws (1).

Release trim panel (2) at clips (3) and remove in downward direction.

Installation: 

If necessary, replace faulty clips (1).

Sound insulation (2) must be fitted.