51 41 019 Removing and installing/replacing door handle on door trim panel, front left or right

Necessary preliminary tasks:

Release screws (1).

Tightening torque 51 41 2AZ. (See BODY EQUIPMENT - TIGHTENING TORQUES article)

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 41 8AZ. (See BODY EQUIPMENT - TIGHTENING TORQUES article)

If necessary, lever out lock (2) and detach lamp (3).

Detach door handle (4) from door trim and if necessary feed out cable.

Fig 2: Identifying Door Handle & Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on door handle (4) must not be damaged or missing:

Fig 3: Identifying Sleeves & Bore For Light

Courtesy of BMW OF NORTH AMERICA, INC.