51 23 110 Removing and installing/replacing left hood/bonnet lock

Release screws (1) and feed out hood/bonnet lock (2) upwards.

Tightening torque 51 23 2AZ.  (See BODY EQUIPMENT - TIGHTENING TORQUES )

Installation: 

Adjust hood/bonnet lock (2) via elongated holes to retaining hook on hood/bonnet.

Fig 1: Releasing Screws & Feed Out Hood/Bonnet Lock Upwards

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage cable (1) from hood/bonnet lock (2).

Fig 2: Disengaging Cable From Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.