51 16 366 Removing and installing right glove box with housing (without active knee protection)

Open glovebox.

Press catches (1) and unclip damper (2) in direction of arrow from glove box (3).

Fig 1: Identifying Catches & Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Press locks (1) and continue folding glove box (2) downwards.

Fig 2: Identifying Locks & Glove Box

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove glove box with housing (2).

If necessary, release plug-in contacts and cable holders from housing (2).

Fig 3: Removing Glove Box With Housing

Courtesy of BMW OF NORTH AMERICA, INC.