51 47 140 Removing and installing/replacing panel for luggage compartment partition

Necessary preliminary tasks: 

• Remove left and right luggage compartment wheel arch trims  (See 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM  and 51 47 161 REMOVING AND INSTALLING/REPLACING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM )

Release clips (2) and feed out panel (1) towards rear.

Installation: 

Make sure panel (1) is correctly seated on roller cover (3).

Fig 1: Identifying Clips & Panel

Courtesy of BMW OF NORTH AMERICA, INC.