51 24 130 Removing and installing/replacing striker for rear lid lock

Lever out trims (1).

Unfasten screws (2).

Fig 1: Identifying Trims & Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Raise trim (1) slightly and remove rear lid lock (2) (rear lid lock lower section).

Installation:

Adjust rear lid lock.  (See 51 24 004 ADJUSTING REAR LID LOCK (LOWER SECTION OF REAR LID LOCK) )

Fig 2: Identifying Rear Lid Lock & Trim

Courtesy of BMW OF NORTH AMERICA, INC.