51 13 115 Removing and installing/replacing cowl panel cover

Necessary preliminary tasks:

Slacken screws (1) and remove cover (2).

Fig 1: Identifying Screws & Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable from cable holder (1).

Remove clips (2) and remove cowl panel cover.

Fig 2: Releasing Cable From Cable Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace defective grommets (1).

Check holder (2) for correct seating.

Fig 3: Identifying Holder & Grommets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be missing or damaged.

Retaining tabs (2) must not be damaged

Fig 4: Identifying Retaining Tabs & Clips

Courtesy of BMW OF NORTH AMERICA, INC.