62 11 280 Removing And Installing (Replacing) Instrument Cluster
Necessary preliminary tasks:
- Remove wood trim on instrument panel on left. See 51 45 360 REMOVING AND INSTALLING/REPLACING WOOD TRIM ON LEFT .
Release screws (1).
Fold instrument cluster (2) towards rear and remove in direction of arrow.
Disconnect plug connection behind.
Installation:
Retaining lugs (1) of instrument cluster (2) must be exactly seated in mountings of instrument panel.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
- Programming
- Coding
- Car & Key Memory
- CD "CIP"