51 45 185 Removing And Installing/Replacing Trim For Pedal Assembly

Release screws (1).

Lower trim (2) slightly and disconnect plug connection for footwell light (3).

Remove trim (2).

Replacement only: 

Lever out footwell light (3).

Fig 1: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Attach hook (2) to carpet lining (3).

Slide trim (4) with guides (5) into holders (1).

Fig 2: Identifying Hook And Carpet Lining

Courtesy of BMW OF NORTH AMERICA, INC.