51 24 050 Removing And Installing/Replacing Lock Element (Lock Cylinder) For Rear Lid (From 03/2005)

Necessary preliminary tasks:

Detach Bowden cables (1 and 2) from rear lid lock.

Lever out expanding wedge (3) and detach guide (4).

Feed Bowden cable (2) out of Bowden cable (1) and guide (4).

Fig 1: Identifying Bowden Cables

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Remove lock element (2) inwards and feed out with Bowden cable (3).

Fig 2: Identifying Lock Element And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unhook Bowden cable (1) from lock element (2).

Release clip (3) and remove Bowden cable (1).

Fig 3: Identifying Bowden Cable And Clip

Courtesy of BMW OF NORTH AMERICA, INC.