LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> Alpina >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair Instructions >> 11 Front Bumper >> 51 11 170 Replacing Body Molding For Left Or Right Bumper

51 11 170 Replacing Body Molding For Left Or Right Bumper

Special tools required: 

Unclip body molding (1) with special tool 00 9 321. 

Remove body molding (1) towards front.

Fig 1: Identifying Body Molding
G04779183Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Version with PDC: 

Remove ultrasonic transducer.  See 66 20 520 REMOVING AND INSTALLING/REPLACING AN ULTRASONIC TRANSDUCER AT FRONT (PARK DISTANCE CONTROL)

Remove holder (1).

Version with Chromeline: 

Release catches (2) and remove chrome trim from body molding.

Fig 2: Identifying Catches And Remove Chrome Trim From Body Molding
G04779184Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals