34 51 Slip Control System (Abs, ASC+T, DSC)
TORQUE SPECIFICATION - SLIP CONTROL SYSTEM
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit on hydraulic unit | E46 (MK20) | 2.6 Nm | ||
| E46 / E85 / E86 / (MK60) | 5 1 Nm | |||
| E38 / E39 / E52 / E53 / E46 AWD / E65 / E66 / E67 | 2.9 Nm | |||
| E60 / E61 / E63 / E64 / E83 | 3±0.3 Nm | |||
| 2AZ Pressure sensor "V" and "H" to master brake cylinder | E46 / E85 | 25 5 Nm | ||
| Pressure sensor to hydraulic unit | E38 / E39 | 20 Nm | ||
| E52 / E53 / E46 AWD / E65 / E66 | Only with special tool 34 1 290 | 19 Nm | ||
| 3AZ Rotation rate sensor / DSC sensor to holder | E46 / E65 / E66 / E67 / E60 / E61 / E63 / E64 / E83 / E85 / E86 | 8 Nm | ||
| 4AZ Bracket, rotation rate sensor to body | E46 / E85 / E86 | 8 Nm | ||
| 5AZ Banjo bolt for pre-boost pump intake line to pre-boost pump | E46 | 20 Nm | ||
| 6AZ Pulse generator to swivel bearing/wheel carrier | E52 / E53 / E46 / E85 / E60 / E61 / E63 / E64 / E67 | 8 Nm | ||
| E39 / E38 / E65 / E66 | 9 Nm | |||
| 7AZ Rotation rate sensor to body | E38 / E39 | 8.6 Nm | ||
| 8AZ Rotation rate sensor to body | E52 / E53 | 8 Nm | ||
| 9AZ Bracket to hydraulic unit | E52 / E53 / E46 / E85 / E86 / E83 / E60 / E61 / E63 / E64 | 8 Nm | ||
| 10AZ Bracket, hydraulic unit to body | E52 / E53 / E46 / E85 / E86 / E83 / E60 / E61 / E63 / E64 | 8 Nm | ||
| 11AZ All screws to precharging pump and holder | E52 / E53 / E46 (M3) / E65 / E66 | M6 | 8 Nm | |
| 12AZ Pressure sensor, front and rear for ACC, to brake line | E60 / E61 / E63 / E64 | 25 5 Nm |