51 32 170 Removing And Installing / Replacing Door Window Glass, Front Left Or Right

Necessary preliminary tasks: 

• Open door window to 140 mm.
• Remove function carrier in front door  . See 51 21 035 REMOVING AND INSTALLING/REPLACING FUNCTION CARRIER ON LEFT OR RIGHT FRONT DOOR .
• Remove outer window cavity cover strip  . See 51 21 302 REMOVING AND INSTALLING/REPLACING CHROME STRIP FOR WINDOW CAVITY COVER STRIP (ON OUTSIDE OF FRONT DOOR) .

Door window glass must be opened to dimension (A).

A = approx. 140 mm

Unfasten screws (1).

Installation: 

Tightening torque 51 32 2AZ.  See BODY EQUIPMENT - TIGHTENING TORQUES -- ALPINA .

Rubber (2) is only fitted at rear.

Turn door window glass and lift out towards rear/top.

Installation: 

Bores (1) of door window glass (5) must not be damaged.

If necessary, install new screws (2), washers (3) and plastic washers (4).

Adjust door window glass  . See 51 32 154 ADJUSTING LEFT OR RIGHT FRONT DOOR WINDOW GLASS .