51 23 110 Removing And Installing/Replacing Left Hood/Bonnet Lock

Necessary preliminary tasks: 

• Remove left headlight  . See 63 12 010 REMOVING AND INSTALLING LEFT HEADLIGHT (XENON HEADLIGHT) .

Disengage Bowden cable (1 and 2) from hood/bonnet lock (3).

Fig 1: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove hood/bonnet lock (2) towards front.

Tightening torque 51 23 2AZ.  See BODY EQUIPMENT - TIGHTENING TORQUES -- ALPINA .

Installation: 

If necessary, adjust engine hood/bonnet  . See 41 61 014 ADJUSTING HOOD LID .

Fig 2: Identifying Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.