32 00 620 Adjusting Rear Axle

NOTE: A camber change always means a toe change as well. The camber must therefore be adjusted first.

Adjusting Camber:

Replace nut (2) and tighten to 5 N.m.

Turn eccentric bolt (1) to adjust camber to setpoint value.

Tighten nut (2).

Tightening torque, refer to 33 32 20AZ in TORQUE SPECIFICATIONS .

Fig 1: Adjusting Camber Eccentric Bolt, Nut And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Adjusting Toe:

Replace nut (2) and tighten to 5 N.m.

Turn eccentric bolt (1) to adjust toe to specified value.

Tighten nut (2).

Tightening torque, refer to 33 32 5AZ in TORQUE SPECIFICATIONS .

Fig 2: Adjusting Toe Eccentric Bolt, Nut And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.