31 35 005 Removing and Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer

IMPORTANT: Observe safety instructions on raising the vehicle. See 00..... LIFTING VEHICLE WITH A LIFTING PLATFORM

NOTE: Stabilizer links may only be replaced in pairs.

Release nut; if necessary, grip brace at Torx socket.

Installation:

Replace self-locking nut.

Tightening torque 31 35 12AZ. See 31 35 STABILIZER BAR

Fig 1: Locating Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut; if necessary, grip brace at Torx socket.

Remove stabilizer link.

Installation:

Replace self-locking nut.

Tightening torque 31 35 12AZ. See 31 35 STABILIZER BAR

Fig 2: Locating Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.