51 46 050 Removing And Installing / Replacing Trim For Rear Panel At Top

Necessary preliminary tasks:

Remove cover (1) for spare wheel.

Fig 1: Removing Spare Wheel Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release expansion rivets (1).

Lever out trim (2) for rear apron inwards/upwards.

Fig 2: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) of trim (2) must not be damaged.

Fig 3: Identifying Guides Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Lever out caps (1) from trim (2).

Fig 4: Identifying Caps And Trim

Courtesy of BMW OF NORTH AMERICA, INC.