51 45 363 Removing and installing/replacing center wood trim on instrument panel

Special tools required:

Unclip instrument cluster trim (1) by applying light thumb pressure upwards on wood trim on left and right.

Fig 1: Uncliping Instrument Cluster Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Installation:

Insert spring washers (2) with dome facing screw head.

Fig 2: Identifying Spring Washers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert instrument cluster trim (3) in mounting (2) of instrument cluster (1).

Fig 3: Inserting Instrument Cluster Trim In Mounting Of Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clip holder (1) into mounting (2).

Fig 4: Identifying Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Do not damage wood trims.

Snap detent lugs (1) on left and right into place with special tool 00 9 340 .

Fig 5: Identifying Special Tool 00 9 340 And Detent Lugs

Courtesy of BMW OF NORTH AMERICA, INC.