LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 760Li >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair Instructions >> 24 Trunk Latch, Locks >> 51 24 050 Removing And Installing/Replacing Lock Element (Lock Cylinder) For Rear Lid (Up To 03/2005)

51 24 050 Removing And Installing/Replacing Lock Element (Lock Cylinder) For Rear Lid (Up To 03/2005)

Necessary preliminary tasks: 

Detach cover (1) from lock element (2).

Fig 1: Detaching Cover From Lock Element
G04767817Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect Bowden cable (3) from element (4).

Installation: 

Retainer (5) must be correctly fitted.

Version with manual unlocking: 

Release screw (1).

Slide Bowden cable with holder (2) to one side.

Fig 2: Identifying Retainer, Bowden Cable And Element
G04767818Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Unscrew lock element (2) in direction of arrow from rear lid (3).

Fig 3: Unscrewing Lock Element From Rear Lid
G04767819Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Perform function check with rear lid open.

Installation: 

Following parts of lock element (5) must not be damaged or missing:

  1. Foam
  2. Bowden cable mounting
  3. Retainer
  4. Cap
    Fig 4: Identifying Cap, Retainer, Bowden Cable Mounting, Foam And Lock Element
    G04767820Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals