51 16 ... Function Test Of Roller Sun Blind Of Left Or Right Rear Door

Special tools required: 

• 00 9 318

Requirements: 

Door window glass must be closed during the function test.

Extend roller sun blind; if necessary, sliding members automatically snap into place in end position.

Function test: 

• Retract roller sun blind (1) and block at pull rod with special tool 00 9 318  at bottom (left and right sliding members snap out)
• Extend roller sun blind (1)
• Sliding members automatically snap into "top" end position
  Fig 1: Identifying Roller Sun Blind And Special Tool 00 9 318

  Courtesy of BMW OF NORTH AMERICA, INC.
• Retract roller sun blind (1)
• Extend roller sun blind (1) and block at pull rod with special tool 00 9 318  at top (left and right sliding members snap out)
• Retract roller sun blind (1)
• Sliding members automatically snap into "bottom" end position
• Extend and retract roller sun blind (1)
  Fig 2: Identifying Roller Sun Blind

  Courtesy of BMW OF NORTH AMERICA, INC.