51 13 440 Removing And Installing/Replacing Trim On Left Or Right Rear Light

Special tools required:

IMPORTANT:

Stick fabric adhesive tape (1) onto trim (3) to below guide (2) (risk of damage).

Snap out trim (3) with special tool 00 9 317 sideways.

Fig 1: Identifying Special Tool 00 9 317, Adhesive Tape And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Snap out upper catch (1) with special tool 00 9 317 .

Slide trim (2) in direction of arrow and thereby release catch (1).

Fig 2: Sliding Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guides (2) on trim (3) must not be damaged.

Fig 3: Identifying Catches And Guides On Trim

Courtesy of BMW OF NORTH AMERICA, INC.