51 11 156 Removing And Installing Front Bumper Trim
Necessary preliminary tasks:
- Remove both PROTECTIVE STRIPS
- Remove BASEPLATE for number/license plate
Build date up to 03/2005:
- Remove both FOG LAMPS
Build date from 03/2005:
- Remove both SIDE GRILLES
Release screws (1) or clip (1) on left/right.
Release screws (1).
IMPORTANT:
Bumper trim must not be pulled out sideways (risk of damage).
Remove bumper trim straight towards front with aid of a 2nd person.
If necessary, disconnect additional plug-in contacts and feed out cable.
Installation:
Observe gap dimensions.