41 34 038 Outer Tail Panel Section Replacement

Read contents of Body, General   .

Spot-weld bonding is used for the first time on the E65. A specific procedure   must be followed here.

Following new body parts are required:

• Rear trim outer skin
  Fig 1: Rear Trim Outer Skin

  Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Release bond in areas (2) with hot air blower.

Installation: 

Apply adhesive   in areas (2).

Fig 2: Open Weld Joint Areas And Adhesive Application Areas

Courtesy of BMW OF NORTH AMERICA, INC.