51 61 Reinforcement, Body
REINFORCEMENT, BODY - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 22AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Tension strut in engine compartment | E60 / E61 / E63 / E64 | M8 | Replace screws | |
| Screw connection again | 27 N.m. | |||
| New component / initial screw connection | 30.5 N.m. | |||
| 2AZ Structural tension strut, front | E64 | M12 | Replace screws | |
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| E64 | M6 | Replace screws | ||
| Jointing torque | 8 N.m. | |||
| 3AZ Tension strut to rear axle | E60 / M5/ E61 / M5/ E63 / M6/ E64 / M6 | M8 | M8 8.8 | 24 N.m. |
| M8 10.9 | 30 N.m. | |||
| E61/ E64 | M12 | Replace screws | ||
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| E61/ E64 | M8 | Nut | 19 N.m. | |
| 4AZ Tension strut, rear axle, front | E61 / M5/ E64 / M6 | M12 | Replace screws | |
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| 5AZ Tension strut, rear axle, rear | E61 / M5/ E64 / M6 | M12 | Replace screws | |
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| 6AZ Cross strut/rear | E61/ E64 | M10 | Nuts | 41 N.m. |
| Screws | 59 N.m. | |||
| 7AZ Connecting carrier to body (tunnel) | E60/ E61/ E63/ E64/ E87/ E88/ E90/ E91/ E92 / S65/ E93 | M8 | 24 N.m. | |
| E65/ E66 | M8 | 19 N.m. | ||
| E83 | M8 | 23 N.m. |