51 49 006 Removing And Installing/Replacing Trim For Rear Lid At Top

Necessary preliminary tasks: 

• REMOVE TRIM FOR REAR LID AT BOTTOM .

Release screws (1 and 2).

Lever out retaining strap and remove tool box (3) in direction of arrow.

Fig 1: Removing Tool Box

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (1) and remove trim (2).

Fig 2: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts of trim (3) must not be damaged or missing:

1. Clips
2. Clip mountings
   Fig 3: Identifying Clip Mountings, Clips And Trim

   Courtesy of BMW OF NORTH AMERICA, INC.