51 37 000 Removing And Installing/Replacing Complete Rear Left Or Right Power Window Unit

Necessary preliminary tasks:

Release screw (1).

Take off holder (2).

Release screws (4) and remove power window unit (3).

Tightening torque: 51 35 2AZ . See POWER WINDOWS, REAR for specs.

Fig 1: Identifying Power Window Unit And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1).

Detach flat motor (3) from power window unit (2).

Tightening torque: 51 35 1AZ . See POWER WINDOWS, REAR for specs.

Fig 2: Identifying Flat Motor And Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.