51 32 420 Removing And Installing/Replacing Trim On Front Door Window Frame, Left Or Right

Necessary preliminary tasks:

Partially detach rubber window seal (1) at rear.

Installation:

Coat rubber window seal (1) with water before fitting.

Fig 1: Detaching Rubber Window Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Press trim (2) towards rear and lever out sideways.

Fig 2: Pressing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim (1) towards top.

Fig 3: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty plastic nuts (1).

Fig 4: Identifying Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check trim (1) for damage, replace if necessary.

Fig 5: Identifying Trim

Courtesy of BMW OF NORTH AMERICA, INC.